Lifetime Quality Guarantee
Steam Cleaners &
Hot Pressure Washers
Portable Propane Fired
Stationary Natural Gas & Propane Fired
Portable Oil Fired
Stationary Oil Fired
Cold Pressure Washers
Electric Motor Driven
Water Heaters, Water Capture Systems,
Demand Heater Modules
Big Blast Series
Big Foot Engine Driven Series
Big Foot Electric Motor Series
Custom Designed Cleaning Systems
Build Your Own Cleaning System
Water Heaters, Water Capture Systems, and Related Products
Email This Page
Save To Favorites
Check up to five results to perform an action.
What is Vacu-Boom™?
An innovative and practical waste water capture system to prevent run-off from washing operations indoors and outdoors.
A highly effective spill containment system for many hazardous materials.
The Vacu-Boom™ system is engineered to be used in a wide variety of industrial and commercial applications where chemicals and fluid waste must be contained and/or captured and removed from the site.
The Vacu-Boom™ is a hollow flexible tube five inches in diameter that is placed directly on a hard surface to form a downside slope dam or to completely encircle the wash or containment area. The boom has a C shaped cross section with the open side down. There are small liquid inlet openings on the water side of the bottom edge. During use, the boom is connected by a 25 foot vacuum hose to the portable wet vacuum recovery unit.
How does Vacu-Boom™ work?
When the wet vac system is turned on, the Vacu-Boom™ tightly seals itself to the surface like a giant suction cup, to form an impervious liquid barrier. Simultaneously, waste water or other liquid is extracted into the boom and travels with the airflow through the boom and vacuum hose into the sump of the vacuum unit. The vacuum unit is equipped with an automatic pump out system, which discharges water through a discharge hose into a holding tank, filter unit or sanitary sewer.
Vacu-Boom™ systems are available in virtually any length or shape using standard components. Examples are straight lines, arcs, semi-circles, ellipses, squares and rectangles. For application recommendations and pricing
Other sizes and configurations are available. For additional information visit
Results Per Page :
Results 1 - 5 of 5
Results 1 - 5 of 5
Spartan Manufacturing Corporation
1536 Brookford Industrial Dr., P.O. Box 917, Kernersville, NC 27284
Ph: 336-996-5585 | Fax: 336-996-6217
Site created by
Thomas Web Solutions
and powered by
Copyright © 2012 Spartan Manufacturing, All Rights Reserved